Search filter

Applications: Tiling; Waterproofing coatings (1)
Brands: Ardal (9); Bostik (1)
Destinations: Floors (9); Walls (9)
Specific characteristics: Exterior (1); Water resistant (1)
Substrates: Ceramic tiles (9)
Segments: ~~Construction~~ (10)

TLH 2355E

LABELS - Hot melt pressure sensitive adhesive for peelable & removable label applications

Additional Downloads
MSDS
7. Tapes & Labels (97 Kb)
Definitions
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling
Open timeTime between the moment the adhesive was applied and the moment it has no more tack (end of possible laying the covering)
TackAdhesive power to maintain together 2 materials. Tacky surface means sticky surface.

Uses

TLH 2355E is a hot melt pressure sensitive adhesive for peelable and removable label applications.

Suitable for most common face stock materials like vellum, cast-coated glossy paper, thermal paper or other design for removable labels and tapes. Suitable for removable applications on paper, maintains adhesion on tightly curved surfaces.

CAUTIONS: Lamination needs to be done during the adhesive open time to get a sufficient anchorage on the face material.

Benefits

Excellent converting properties and die-cut ability
Provides constant resistance during peeling
Good adhesion on cardboard, wood, paper substrates hence giving excellent removable properties
Complies with FDA Agreement: 175 105 (indirect or direct occasional food contact)

Properties

Physical:

Colour (Gardner index)	Pale yellow - 4
Viscosity Thermosel at 163°C (spindle 27, 10 rpm)	11 000 mPas (±3 000)
Softening point (Ring and Ball)	96°C (±5°)

Technical performances (20gsm on PET 50µm)

Peel adhesion at 180° (FTM 1 – Glass – 20min) (FTM 1 – Glass – 24hrs)	3 N/inch 4 N/inch
Loop-Tack (FTM 9 – Glass)	7 N/inch

Release system compatibility:

Solvent based Silicone => Compatible
Solventless Silicone => Compatible
UV-curable Silicone => Compatible

Recommendation: compatibility needs to be checked with your release system

Consumption:

Average coating weight: 20-35gsm (coating weight depends on type of substrate)

Shelf life:

Up to 1 year stored in its original packaging in a clean and dry place at a temperature not exceeding +35°C.

Application

TLH 2355E can be applied by roll coater or slot die nozzle at temperatures between 150 - 170°C.
Rotating slot die nozzle is recommended for low coating weight (15-30gsm).

Clean up
Purge with the adhesive itself.

Packaging

Presentation	Bar code	Bostik code
carton box (free pack) - 12 kg		068281