Search filter

Applications: Assembly and repair (5); Grab adhesives (1); Home decoration (11); Parquet (2); PVC welding (1); Soft floor (carpet /PVC) (1); Wall adhesives (6); Wood working (1)
Brands: Bostik (4); Quelyd (13)
Destinations: Floors (3); Walls (5)
Specific characteristics: Environmentally friendly (10); Exterior (3); Heat resistant (1); Ready-to-use (11); Suitable on wet substrate (1); Water resistant (2)
Substrates: Paper/cardboard (10); PVC (2)
Segments: Construction (13); Consumer

TLH 2259E

LABELS - Hot melt pressure sensitive adhesive for deep freeze applications

Additional Downloads
MSDS
7. Tapes & Labels (97 Kb)
Definitions
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling
TackAdhesive power to maintain together 2 materials. Tacky surface means sticky surface.

Uses

TLH 2259E is a hot melt pressure sensitive adhesvie for labels. Designed for deep freeze labels.

Suitable for most common face stock materials like vellum, cast-coated glossy paper, thermal paper or other. Suitable for deep freeze applications on paper & polyolefin.

Benefits

Very high grab product
Excellent converting properties
Allows labelling of cold surfaces that have a degree of surface condensation
Complies with FDA Agreement: 175 105 (indirect or direct occasional food contact)

Properties

Physical:

Colour (Gardner index)	pale yellow – 4
Viscosity Thermosel at 163°C (spindle 27, 10 rpm)	15 000 mPas (±4 000)
Softening point (Ring and Ball)	97°C (±5°)

Technical performances (20gsm on PET 50µm)

Peel adhesion at 180° (FTM 1 – PP – 20min) (FTM 1 – HDPE – 20min)	> 15 N/inch > 15 N/inch
Loop-Tack (FTM 9 – Glass)	> 20 N/inch

Release system compatibility:

Solvent-based Silicone => Compatible
Solventless Silicone => Compatible
UV-curable Silicone => Compatible

Recommendation: compatibility needs to be checked with your release system

Consumption:

Average coating weight: 20-22gsm (coating weight depends on type of substrate)

Shelf life:

Up to 1 year stored in its original packaging in a clean and dry place at a temperature not exceeding +35°C.

Application

TLH 2259E can be applied by roll coater or slot die nozzle at temperatures between 150 - 170°C.
Rotating slot die nozzle is recommended for low coating weight (15-30gsm).

Clean up
Purge with the adhesive itself.

Packaging

Presentation	Bar code	Bostik code
cardboard drum - 165 kg		068150
block - 7 kg		068153