New Search > Suitable on wet substrate
Page :
7 products
Assembly and repair
(1)
Grab adhesives
(1)
Industrial seamless floors
(1)
Labelling
(3)
Substrate preparation/Primers
(1)
Waterproofing coatings
(2)
Ardal
(1)
Bostik
(4)
Eponal
(2)
Floors
(2)
Walls
(1)
Environmentally friendly
(3)
Exterior
(3)
Heat resistant
(1)
Ready-to-use
(5)
Suitable on wet substrate
Water resistant
(2)
Ceramic tiles
(1)
Paper/cardboard
(2)
PVC
(1)
Construction
(4)
Consumer
(1)
Industry
(3)
One-component liquid waterproofing membrane designed to form after curing an elastic membrane for water-proofing applications. Indoor/outdoor application. Especially designed to provide waterproofing membrane before tile fixing.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for low speed (< to 30 000 bottles/hour). Good flow characteristics.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for high speed (up to 80 000 bottles/hour). Good flow characteristics. Good resistance to water condensation.
Labelling of paper labels on glass bottles. Cold, warm, wet or dry conditions. Very high green tack characteristic preventing slipping of paper labels. Suitable for high speed (up to 60 000 bottles / hour).
Waterproofing Barrier Coating - Epoxy Floor primer - Crack Repair. It is used as a bonding primer on damp concrete subfloors or on subfloors likely to suffer later from rising damp. It can, even in areas subject to hydrostatic pressure, provide a surface damp proof barrier where a structural DPM is not present or is ineffective. It allows the early installation of moisture sensitive floor coverings in fast track building operations.
MSDS - Hardener MSDS - Resin 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko) 4. Industrial Floorings and Playgrounds (1187 Ko) Application scheme Eponal 321+326 (660 Ko) Application scheme Eponal 326 (516 Ko) Application scheme Novaflex 330 (265 Ko)
Two-component solvent-free epoxy adhesive suitable for bonding Hypalon and soft PVC to concrete; horizontal embedding of steel / concrete; bonding concrete elements. Excellent adhesion to concrete, Hypalon and soft PVC (after use of special primer). High mechanical strength.
Very ersatile grab adhesives suitable for outdoor and wet rooms. High temperature resistant, can be applied on humid substrates. Hybrid technology, environment friendly
Page :