Search filter

Applications: Substrate preparation/Primers (2); Tiling (9); Waterproofing coatings (3)
Brands: Ardal
Destinations: ~~Floors~~ (14); Walls (11)
Specific characteristics: Exterior (3); Ready-to-use (3); Suitable on wet substrate (1); Water resistant (2)
Substrates: Ceramic tiles (9)
Segments: ~~Construction~~ (14)

ARDAL XT.7751

Hot melt adhesive for edgebanding and soft forming applications

Additional Downloads
MSDS
5. Woodworking adhesives (1284 Kb)
Definitions
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling
TackAdhesive power to maintain together 2 materials. Tacky surface means sticky surface.

Uses

ARDAL XT.7751 is a filled hot melt adhesive for edgebanding and soft forming applications of polyester, melamine paper, wood veneer on particle boards and plywood.

Benefits

Suitable for IMA, Homag, Holz Her, Biesse, Stephani machines
Specially designed for use on high speed line such as POWER- LINE by HOMAG: up to 120m/min
Coating speed: 15-80 m/min
Excellent initial cohesion
Very good thermal stability
High hot tack
No stringing
High heat resistance: 80-100°C

Properties

Physical:

- Application temperature: 190-210°C
- Aspect: prills
- Colour: natural
- Viscosity Thermosel at 200°C: approx. 105 000 mPa.s
- Softening point, R&B: approx. 120°C

Viscosity curve

Shelf life:

2 years in original unopened packaging, stored at ambient temperature. Keep away from humidity.

Application

The panels and the edges should be kept at ambient temperature (which should not be below +15°C); wood moisture content should not exceed 10% in order to achieve good bonding results.

Coating weight (depending on panel quality): 150-350 g/m² for straight edgebanding.

Coating weight (depending on panel quality): 150-200 g/m² for soft forming.

Packaging

Presentation	Bar code	Bostik code
bag - 25 kg		066740