Search filter

Applications: Substrate preparation/Primers (2); Tiling (9); Waterproofing coatings (3)
Brands: Ardal
Destinations: ~~Floors~~ (14); Walls (11)
Specific characteristics: Exterior (3); Ready-to-use (3); Suitable on wet substrate (1); Water resistant (2)
Substrates: Ceramic tiles (9)
Segments: ~~Construction~~ (14)

ARDAL T.7641 N

Hot-melt adhesive for edgebanding application

Additional Downloads
MSDS (28 Kb)
Definition
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling

Uses

ARDAL T.7641 N – filled hot-melt adhesive especially designed for edgebanding application of polyester, melamine paper, PVC, ABS and wood veneer on particle boards or plywood.

Benefits

Suitable for IMA, Homag, Holz Her, Biesse, Stephani coating machines
Suitable for coating speed from 20 to 80 m/min
No separation in tank when molten
Good cohesion
Good thermal stability
No stringing
Good heat resistance: 70-80°C

Properties

Physical:

- Application temperature: 190-205°C
- Aspect: prills
- Colour: white
- Viscosite Thermosel at 200°C: approx. 93 000 mPa.s
- Softening point: approx. 98°C

Viscosity curbe

Consumption:

Coating weight (depending on panel quality): 150-350 g/m².

Shelf life:

2 years in original unopened packaging, stored at ambient temperature. Keep away from humidity.

Application

The panels and the edges should be kept at ambient temperature (which should not be below +15°C); wood moisture content should not exceed 10% in order to achieve good bonding results.

Packaging

Presentation	Bar code	Bostik code
bag - 25 kg		063445