Search filter

Applications: Substrate preparation/Primers (2); Tiling (9); Waterproofing coatings (3)
Brands: Ardal
Destinations: ~~Floors~~ (14); Walls (11)
Specific characteristics: Exterior (3); Ready-to-use (3); Suitable on wet substrate (1); Water resistant (2)
Substrates: Ceramic tiles (9)
Segments: ~~Construction~~ (14)

ARDAL T.7071 N

Hot-melt adhesive for edgebanding and soft forming applications

Additional Downloads
MSDS
Definition
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling

Uses

ARDAL T.7071 N is a hot-melt adhesive for edgebanding and soft forming applications of almost all types of edges: wood, melamine paper, plastic (ABS, PVC, polyester, etc.). Suitable for thick wood (up to 3cm maximum) and difficult edges.

Benefits

Coating speed for straight edgebanding: from 30 to 80 m/min
Coating speed for soft forming: from 25 to 30 m/min
Excellent initial cohesion
Good thermal stability
High heat resistance: 70–100°C

Properties

Physical:

- Application temperature: 190-200°C
- Aspect: prills
- Colour: natural
- Viscosity Thermosel at 190°C: approx. 185 000 mPa.s
- Softening point: approx. 115°C

Viscosity curve

Shelf life:

2 years in original unopened packaging, stored at ambient temperature. Keep away from humidity.

Application

The panels and the edges should be kept at ambient temperature (which should not be below +15°C); wood moisture content should not exceed 10% in order to achieve good bonding results.

Coating weight (depending on panel quality): 150-200 g/m² for soft forming.

Coating weight (depending on panel quality): 150-350 g/m² for straight edgebanding.

Packaging

Presentation	Bar code	Bostik code
bag - 25 kg		063502